Pips strategy · Guide
Pips Strategy: Less-Than and Greater-Than Regions
<4 >4 A “<” or “>” badge puts a limit on the total of a region instead of fixing it. Some of these limits are so tight they are exact answers, and others barely rule anything out. Telling the two apart is most of the skill.
What the rule says
The pips in the region must add up to less than the number (for “<”) or more than it (for “>”). The limit itself is not allowed: “<4” means 3 or under, and “>4” means 5 or over.
Most of these regions are a single cell, where the rule reads as a short list of allowed numbers. On a region of two or more cells the limit applies to the total, not to each cell.
What a one-cell limit allows
| Limit | “<” allows | “>” allows |
|---|---|---|
| 1 | blank | 2, 3, 4, 5, 6 |
| 2 | blank, 1 | 3, 4, 5, 6 |
| 3 | blank, 1, 2 | 4, 5, 6 |
| 4 | blank, 1, 2, 3 | 5, 6 |
| 5 | blank, 1, 2, 3, 4 | 6 |
| 6 | blank, 1, 2, 3, 4, 5 | nothing fits |
How often it comes up
These figures come from the 457 days of NYT Pips puzzles this site has checked, and are recalculated every day.
| Rule | Share of all rules | Easy boards | Medium boards | Hard boards | Average size | One-cell |
|---|---|---|---|---|---|---|
| “<” regions | 9% | 42% | 55% | 48% | 1.3 cells | 77% |
| “>” regions | 12% | 44% | 62% | 61% | 1.2 cells | 81% |
The board columns show how many boards of that difficulty have at least one such region. The most common “<” limits are 3 (27%), 2 (27%), 4 (18%). The most common “>” limits are 4 (27%), 3 (20%), 2 (13%).
4 ways to use it
1. Spot the bounds that are really exact
Some limits leave one possibility. “<1” is blank, however many cells the region has. On one cell, “>5” is a six. On two cells, “>11” is two sixes. Treat these exactly like number regions and start with them.
One step looser is still strong: a single “<2” cell is a blank or a one, a single “>4” is a five or a six, and two cells marked “>10” are a five and a six or two sixes.
2. Turn a one-cell bound into a list, then check the tray
Write the rule as the numbers it allows, then look for dominoes with one of those halves. High and low halves are scarce, so a “>4” cell on a tray with a single five and no six is already solved.
Remember the other half. Whichever domino goes on the cell also covers a neighbour, and the neighbour’s rule has to accept that half.
3. Keep a running total on bigger regions
For a “<” region, each half you place uses up room. With “<6” and a 4 already inside, the open cells may add up to 1 at most. For a “>” region, work out what is still needed and whether the open cells can reach it: with “>9” on three cells and a 1 and a 2 placed, the last cell would need a 7, so one of those placements is wrong.
That second check catches mistakes early. A “>” region fails the moment the open cells cannot reach the limit even with sixes.
4. Use loose bounds as parking spots
A two-cell “<12” accepts everything except two sixes. A “>0” region just needs one pip somewhere. Rules like these will not help you start, so skip them at first.
They are useful at the end. When a domino has one half that fits a tight rule and another half that is awkward, a loosely bounded cell next door is where the awkward half can go.
Common mistakes
- Allowing the limit itself. “<4” does not include 4 and “>4” does not include 4.
- Applying the limit to each cell of a multi-cell region. It is a limit on the total.
- Forgetting blanks. A blank adds nothing, which helps a “<” region and hurts a “>” region.
Practise less-than and greater-than regions
Pips Unlimited can build boards around this one rule. Each is checked by our solver and has a hint button.